Nut, Spindle M20x1.5

The threads on this M20x1.5 nut are clean and consistent, which made tightening it onto my lathe's spindle smooth without any binding. It's holding the chuck firmly with zero wobble during operation.

The threads cut clean and true, which made seating it on the spindle a breeze after I’d been fighting a worn one. It’s a solid, precise replacement that fixed the wobble in my setup, and the fit on the M20x1.5 was spot-on for my bench top lathe.

The threads on this M20x1.5 nut engaged smoothly from the first turn, no binding at all. Fixed my cross-slide backlash issue in under five minutes.