Nut, X-Axis Feed 16 TPI

Dropped this into my mini mill and the table now moves exactly 0.0625" per turn of the hand wheel, which is what I needed. The right hand thread matched up fine and there's barely any play in the nut now.

Threads on clean and the 16 TPI matched my hand wheel's 0.0625" per turn exactly. Only gripe is there's a touch of backlash I had to shim out, but for the price it beats chasing down an OEM part.

Swapped this onto my mini mill after the old nut developed too much backlash, and the 0.0625" per turn matches my hand wheel exactly. Backlash is down to a few thousandths now, though I did have to file a burr off the threads before it spun on smooth.