What the D-gear spacer actually does
The D-gear spacer is a small but important part in the gear train of LittleMachineShop.com HiTorque bench lathes and SIEG SC4 bench lathes. Its job is to maintain proper spacing and alignment of the D-gear assembly during operation. When the spacer is missing, worn, or incorrectly seated, the gear can sit out of position, leading to noise, poor engagement, or accelerated wear.
This spacer is manufactured by Sieg Industrial Group and is sold as a replacement part for maintaining the lathe's gear system. It is not a performance upgrade—it's a straightforward maintenance item that keeps the gear train running as intended.
Catalog details for the D-gear spacer
- Spacer, D-Gear Bench Lathe: Compatible with LittleMachineShop.com HiTorque bench lathes and SIEG SC4 bench lathes. Confirm this is the correct spacer for your lathe model before ordering.

Spacer, D-Gear Bench Lathe - Spacer, D-Gear Bench Lathe: Acts as a spacer for the D-gear assembly. Its sole function is to maintain spacing; it does not repair damaged gears or bearings.
- Spacer, D-Gear Bench Lathe: Manufactured by Sieg Industrial Group. Indicates it is an OEM-style replacement part, not a generic hardware store spacer.
Symptoms that may point to a spacer problem
- New or increased gear noise: A missing or worn spacer can allow the D-gear to shift slightly, changing the mesh pattern and producing noise that wasn't there before.
- Visible gap or misalignment: With the gear cover off (lathe unplugged), inspect the D-gear area. If the gear sits noticeably off-center or there's an obvious gap where a spacer should be, the spacer may be missing or worn.
- Loose gear feel: If the D-gear can be rocked or moved axially more than expected, the spacer may no longer be holding it in position. Compare with the opposite gear or consult your lathe's parts diagram.
What the supplied information does not cover
The catalog record for this spacer does not include installation instructions, torque values, or operating procedures. It also does not specify a replacement interval or wear limits. If you are unsure whether the spacer is the cause of your lathe's symptoms, or if you need step-by-step fitting guidance, consult your lathe's service manual or contact the manufacturer for guidance specific to your machine.
Absence of this information in the product record is not evidence that the spacer is unnecessary or that any procedure is safe to improvise. Treat the spacer as a precision part that must be fitted correctly.
A cautious approach to replacement
- 1. Confirm compatibility: Verify your lathe is a LittleMachineShop.com HiTorque or SIEG SC4 model. This spacer is not listed for other lathes.
- 2. Inspect before ordering: With the lathe unplugged, remove the gear cover and locate the D-gear. Check for a missing, worn, or displaced spacer. A parts diagram for your lathe will show the correct arrangement.
- 3. Order the correct part: Use the product ID 1279933 to ensure you receive the D-gear spacer, not a similar-looking spacer for another location.
- 4. Fit with care: The supplied information does not include fitting instructions. Follow your lathe's service documentation. Do not force the spacer or modify it to fit.
When replacement is the right call
If you have confirmed that the D-gear spacer is missing, cracked, or worn to the point that it no longer maintains gear spacing, replacing it with part 1279933 is the correct fix. This is a low-cost maintenance part (catalog price USD 2.61) that can prevent more expensive gear damage down the line.
If the spacer appears intact and correctly seated, look elsewhere for the cause of gear noise or misalignment—such as worn gears, bearings, or a loose shaft. The spacer is only one link in the gear train, and the catalog information does not support using it to diagnose unrelated faults.


