OXA QCTP Tooling Package for 8x12 and 8x14 Bench Lathes

Quick answer

Buy the OXA quick change tool post package if you own a G0768, 8x12, or 8x14 bench lathe and want a wedge-type steel tool post with five holders plus the mounting hardware in one order. Skip it if your lathe is a different size or you already have a working QCTP with enough holders.

What the package actually solves on a small lathe

On an 8-inch bench lathe, the weak point is often not the lathe itself but the time lost swapping and shimming a lantern or four-way tool post. A quick change tool post lets you move from turning to facing to threading without resetting tool height each time. This package bundles that changeover with the mounting hardware and five holders, so you are not hunting for separate parts before your first cut.

The trade-off is commitment: a QCTP package is a system purchase, not a single accessory. If you only need one or two tool positions, a smaller individual holder purchase may be enough. If you plan to run several operations in sequence, the bundled holders are the practical reason to choose a package.

Wedge-type steel construction: what it means at the bench

The supplied catalog describes the tool post as a wedge-type made of all steel, with no tools required to change tools. In practice, a wedge-type post uses a wedge mechanism to clamp the holder, and the all-steel body is aimed at repeated clamping on a small lathe. The tool-free change is the feature you will notice daily: you can swap holders by hand rather than reaching for a wrench.

Do not read this as a claim about rigidity or repeatability beyond what the catalog states. The honest limitation is that the listing does not supply dimensions, holder sizes, or a compatibility chart beyond the named lathes. If your lathe is not a G0768, 8x12, or 8x14, treat fit as unconfirmed and verify before ordering.

When a package beats buying holders one at a time

Buying individual holders later is normal, and the catalog notes that additional tool holders are available. That makes the package a starting point rather than a closed set. The decision rule is simple: if you already know you will use three or more tool positions, the package saves you from piecing together the post, mounting hardware, and holders separately.

If you are still deciding between tool post styles, compare the changeover method first. A turret-style holder and a quick change tool post solve different problems, and the package only makes sense once you have chosen quick change as your method.

Decision rules for the OXA package

• Confirm your lathe model first: Buy only if your lathe is a G0768, 8x12, or 8x14. The catalog ties the included hardware to those models, so a different lathe leaves fit unconfirmed. Check the model plate on your lathe before ordering.
• Count the tool positions you actually use: Choose the package if you routinely switch between three or more operations such as turning, facing, and threading. If you only need one or two positions, individual holders may be the lower-commitment path.
• Decide whether tool-free changes matter to you: The wedge-type post is designed for tool changes without tools. If you are comfortable shimming a four-way post and change tools rarely, the package's main daily benefit is smaller.
• Plan for extra holders before you need them: The package includes five holders, and additional holders are available separately. If your workflow uses more than five dedicated tools, budget for extra holders rather than swapping inserts mid-job. List your five most-used tools and confirm they fit the included holders.

Product facts

• Tooling Package, G0768, 8x12, 8x14 Bench Lathes + OXA QCTP: The package contains the tool post, mounting hardware, and five tool holders, with hardware matched to the G0768, 8x12, or 8x14 lathe. You get a complete first-day setup for those named lathes instead of sourcing the post and holders separately.

  

Who should buy this package

Best for

• Owners of a G0768, 8x12, or 8x14 bench lathe who want a complete quick change setup in one order
• Machinists who switch between several turning, facing, and threading operations and want tool-free holder changes

Not for

• Lathes other than the G0768, 8x12, or 8x14, where fit is not confirmed by the catalog
• Owners who already have a working QCTP with enough holders for their work