Blog

HiTorque Large Bench Mill Timing Belt Setup Guide

Learn how to set up the low-speed timing belt on a HiTorque large bench mill, including when to use it and common mistakes to avoid.

Drill Stand for 1/16 to 1/2 Inch Drills: Buying and Using

Learn what to look for in a drill stand for 1/16 to 1/2 inch drills, including when a basic organizer is enough and when you need a custom case.

Miniature 4 Flute Double Ended HSS End Mills: Sizes and Uses

A practical guide to choosing miniature 4 flute double ended HSS end mills for small slotting, engraving, and pocketing on bench top mills and lathes.

40 Tooth Gear for Mini Lathe: Installation and Setup Guide

Learn how to install and set up a 40 tooth change gear on your mini lathe for threading operations. Step-by-step instructions with common mistakes to ...

Fuse Box Replacement on HiTorque Large Bench Mill Deluxe

Learn how to diagnose and replace a blown fuse on your HiTorque large bench mill deluxe with LED controls. Step-by-step guide for safe electrical trou...

Nut Feed Screw Compound: What It Does and How to Apply

Learn what a feed screw compound is, why it matters for your bench lathe, and a step-by-step guide to applying anti-wear compound to the compound feed...

Using a Combination Square Set for Mill and Lathe Setup

Learn how to use a combination square set for mill and lathe setup, including checking tram, aligning vises, and setting tool heights with a Starrett ...

Strain Relief 16 mm: When and How to Install

Learn when to replace the 16 mm strain relief on your bench mill and follow step-by-step instructions to install it correctly and protect the power co...

Installing a Depth Base on a 6-Inch Caliper

Learn how to install a depth base on a 6-inch caliper for precise depth measurements of slots, steps, and grooves. A simple upgrade for bench top mach...

Choosing a Micrometer Stand for Bench Work

A micrometer stand keeps your precision tool safe and accessible. This guide explains what to look for and when a basic cast-iron stand is enough.

How to Use a Z-Clamp on a Bench Mill or Lathe

Learn how to use a Z-clamp to securely hold vises and rotary tables on your bench mill or lathe. Step-by-step setup tips and common mistakes to avoid.

Why Your Mini Lathe Needs a Control Box Assembly

A control box assembly is the electronic brain of your mini lathe, regulating speed, direction, and safety. Learn how it works and when to replace you...