What's in the kit and which lathes it fits
- What exactly comes in the Bench Lathe Starter Kit?
- The kit includes eight 3/8" square by 2-1/2" long M2 high-speed steel tool bits: No.1 Right-Hand Turning Tool (80°), No.2 Left-Hand Turning Tool (80°), No.3 Straight Turning Tool (60°), No.4 Corner (45°) Tool, No.5 Parting Tool, No.6 Boring Tool, No.7 Threading (60°) Tool, and No.8 Corner (60°) Tool. It also includes a drill chuck with a 0-1/2" capacity, a 2MT to 33JT arbor, and four center drills (sizes 1–4 with 60° countersinks).
- Will this kit fit my bench lathe?
- The kit is designed for 8x–9x bench lathes and is appropriate for lathes with a standard 2MT tailstock taper. The tool bits are 3/8" square, which matches the standard turret tool post on most bench lathes. If your lathe has a different tailstock taper or uses a different tool bit size, you may need separate components.
- What is the drill chuck capacity and runout?
- The included drill chuck has a rated capacity of 1 mm (0.039") to 13 mm (0.512") and a runout of 0.008" (0.20 mm) or less. It mounts via a 2MT to 33JT arbor and includes a chuck key.
Kit contents at a glance
- Bench Lathe Starter Kit, 3/8" Tool Bits: Set includes: No.1 Right-Hand Turning Tool (80°), No.2 Left-Hand Turning Tool (80°), No.3 Straight Turning Tool (60°), No.4 Corner (45°) Tool, No.5 Parting Tool, No.6 Boring Tool, No.7 Threading (60°) Tool, No.8 Corner (60°) Tool. Confirms the eight tool bit shapes you get, so you can plan which operations each bit handles.

Bench Lathe Starter Kit, 3/8" Tool Bits - Bench Lathe Starter Kit, 3/8" Tool Bits: 3/8" square by 2-1/2" long HSS mini lathe tool bits (6288) made of M2 high speed steel. M2 HSS is a common tool steel for general lathe work; the 3/8" size fits standard turret tool posts on most bench lathes.
- Bench Lathe Starter Kit, 3/8" Tool Bits: This starter kit is appropriate for lathes with a standard 2MT tailstock taper (2955). The tailstock taper determines whether the included drill chuck and center drills will fit your lathe.
Using the tool bits: turning, facing, and threading
- Which bit should I use for general turning?
- The No.1 Right-Hand Turning Tool (80°) and No.2 Left-Hand Turning Tool (80°) are intended for turning operations, with the right-hand tool typically used for turning toward the headstock and the left-hand for turning toward the tailstock. The No.3 Straight Turning Tool (60°) is another option for straight turning.
- How do I face a part with these bits?
- Use the No.4 Corner (45°) Tool for chamfering and corner work, and the No.8 Corner (60°) Tool for other corner operations. For facing, a right-hand turning tool can also be fed radially, but the specific technique depends on your setup and experience.
- Can I cut threads with this kit?
- Yes, the kit includes a No.7 Threading (60°) Tool, which is shaped for cutting 60° threads. The actual threading procedure depends on your lathe's capabilities and your skill level; consult your lathe manual for proper settings.
- What is the parting tool for?
- The No.5 Parting Tool is designed for parting off workpieces. Parting can be challenging for beginners; use conservative feeds and ensure the tool is properly aligned.
Drill chuck and center drills
- How do I mount the drill chuck?
- The chuck uses a 2MT to 33JT arbor. The 2MT end fits into your lathe's tailstock taper, and the 33JT end fits the chuck. Ensure both tapers are clean before assembly.
- What are the center drills used for?
- The four center drills (sizes 1–4) are combined drills and countersinks with 60° countersinks. They are used to create a starting hole and chamfer for drilling between centers or for tailstock support.
What the catalog doesn't specify
The supplied information does not include recommended cutting speeds, feeds, or grinding angles for these tool bits. For those details, refer to your lathe's manual or a machinist's handbook. The kit provides the basic tools, but you'll need to develop your own speeds and feeds based on the material you're cutting.


