Products for bench top machinists | LittleMachineShop.com

Nut, Cross Slide Feed 20 TPI

Nut, Cross Slide Feed 20 TPI - Main image
$6.47 $9.95 In stock

미니 선반용 크로스 슬라이드 피드 너트입니다.
나사산은 20 TPI이므로 컴파운드 레스트는 회전당 0.050\" 전진합니다. 50눈금이 있는 다이얼과 함께 사용하십시오.

결제 전 확인

이용 가능한 결제 방법과 최종 금액은 결제 화면에 표시됩니다.

발송까지 걸리는 시간

주문 처리 시간과 배송 시간을 모두 고려하세요.

Standard Shipping: 주문 처리 (영업일) 0–1; 운송 (영업일) 7–15.

Express Shipping: 주문 처리 (영업일) 0–1; 운송 (영업일) 7–15.

정책 보기
환불이 필요할 때

환불 문의 시 판매점에 주문번호를 알려주세요.

반품 전에 환불 처리 기간을 확인하세요.

정책 보기
배송 비용

배송지와 선택한 서비스의 요금을 확인하세요.

Standard Shipping · 미국: US$0.00

Express Shipping · 미국: US$3.99

정책 보기
반품 전 확인

상품을 보내기 전에 적용되는 반품 조건을 확인하세요.

미국 · 반품 기한 (수령 후 일수): 30. 반품 방법: 우편 반품. 반품 배송비: 판매자 부담.

정책 보기

Customer Reviews (5.0 / 5 · 5 reviews)

Henry ★★★★★

Finally, a nut that actually fits the cross slide without any filing or slop. The 0.050" per turn matches my dial’s 50 divisions perfectly, so I can trust every mark when I’m sneaking up on a cut. This one’s going to save me a lot of frustration on the mini lathe.

Emily F. ★★★★★

The 20 TPI threading is spot on—my compound rest now moves exactly 0.050" per turn, and the dial with 50 divisions lines up perfectly. Installing it was straightforward, and it feels solidly machined for the price.

Claire ★★★★★

Had to swap this in because the old nut had too much slop. The 20 TPI thread matches perfectly, and the 0.050" per revolution makes dialing in cuts straightforward.