Products for bench top machinists | LittleMachineShop.com

Spider, 9x20 HiTorque Bench Lathe Spindle

Spider, 9x20 HiTorque Bench Lathe Spindle - Main image
Spider, 9x20 HiTorque Bench Lathe Spindle - View 2Spider, 9x20 HiTorque Bench Lathe Spindle - View 3Spider, 9x20 HiTorque Bench Lathe Spindle - View 4
$56.92 $84.95 In stock

Bench lathe spindle spider. Made for LittleMachineShop.com and designed specifically for the HiTorque 9x20 and SIEG SC50 bench lathe spindle.

Use this spider to support long stock extending out the back of the spindle. The spider has a 1" (25 mm) diameter capacity with four adjustment screws sized M6x20.

Mount on back of spindle by removing and replacing one of the M33x1.5 spindle locking nuts (6599). Once attached to spindle, stock is secured by four cap screws.

* NOTE: Requires having change gear door open during operation and unscrewing safety latch key (6117) from door and inserting into "auto-stop" safety mechanism. Mounted Spider shown is for mini lathe.

Before you pay

Check the method and total at checkout.

When it ships

Allow for processing time as well as the journey to you.

Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.

View policy
If you need a refund

Keep your order number and contact the store to start.

Please contact us for the refund processing timeframe before returning an item.

View policy
Delivery costs

Review the cost for your destination and chosen service.

Standard Shipping · United States: $0.00

Express Shipping · United States: $3.99

View policy
Returning an item

Check the return conditions before sending anything back.

United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.

View policy

Customer Reviews (4.6 / 5 · 5 reviews)

Victoria F. ★★★★★

The fit on the HiTorque spindle is spot-on, no wobble or play once I snugged it down. It takes maybe a minute to install, and my long stock finally runs true through the back end. Exactly what I needed for this lathe.

Violet J. ★★★★★

Had a long piece of stock that kept wobbling out the back of the lathe, and this spider solved it completely. The fit onto the spindle is tight and secure, and now I can work on much longer workpieces without any worry.

Chloe ★★★★★

The fit on the HiTorque spindle is spot-on—no wobble or fuss sliding it into place. I’ve been running a 2-foot brass rod through the back for a couple of hours and it holds steady, which is exactly what I needed.