What the 0XA Tool Holder Does
The 0XA quick change turning and boring tool holder is designed for 0XA (series 000) quick change tool posts. It handles turning, facing, and boring operations on mini lathes. Its key feature is the V groove in the bottom, which securely holds round shank tools up to 1/2" diameter, in addition to square shanks of the same size. All working parts are hardened and ground for durability.
0XA vs AXA: What's Different?
The main difference between 0XA and AXA tool holders is the post size they fit. 0XA holders are smaller and intended for mini lathes with series 000 posts. AXA holders fit the larger AXA posts found on bigger lathes. If you have a mini lathe, the 0XA is the correct choice. If your lathe uses an AXA post, you need an AXA holder.
- Post compatibility: 0XA holders fit 0XA (series 000) posts. AXA holders fit AXA posts. They are not interchangeable.
- Shank capacity: Both 0XA and AXA holders typically accept up to 1/2" square or round shanks. The 0XA holder has a V groove for round tools.
- Lathe size: 0XA holders are for mini lathes. AXA holders are for larger lathes.
Choosing Between 0XA and Other Sizes
When selecting a quick change tool holder, the most important factor is your lathe's tool post size. If you have a mini lathe with a 0XA (series 000) post, the 0XA holder is the only option that will fit. If you have a larger lathe with an AXA post, you need an AXA holder. There is no universal holder that fits both. The 0XA holder's V groove is a useful feature for round shank tools, which may not be present on all holders.
Product Facts: 0XA Tool Holder
- Quick Change Turning & Boring Tool Holder, 0XA: Turning, facing and boring tool holder for 0XA, or series 000, quick change tool posts. Holds tools with up to 1/2" square or round shanks. Has a V groove in the bottom to hold round tools. All working parts are hardened and ground. Has a #2 designation, typically 250-002 or OXA-2. The V groove is a key differentiator for round shank tools. The #2 designation helps identify the holder for ordering or reference.

Quick Change Turning & Boring Tool Holder, 0XA
What to Check Before Buying
Before purchasing a tool holder, verify your lathe's tool post size. If you are unsure, measure the post or check the lathe manual. The 0XA holder is designed for series 000 posts. Also consider the shank type of your cutting tools. If you use round shank tools, the V groove in the 0XA holder provides secure clamping. For square shanks, any compatible holder will work.


