Buying Guides 2026-11-21 Products for bench top machinists | LittleMachineShop.com 0 views
AXA QCTP Stud for HiTorque 9x20 Lathes: Fit Guide
A practical FAQ covering the AXA QCTP stud for HiTorque 9x20 lathes: dimensions, fit, installation, and compatibility with the AXA tool post and compound rest.
AXA QCTP Stud Fit and Installation FAQ
What is the AXA QCTP stud for HiTorque 9x20 lathes?
It is a black-phosphate class 10.9 steel bolt that runs through the middle of the AXA tool post into the 14mm x 2mm threading of the compound rest. It is a replacement component for the HiTorque 9x20 lathe's quick change tool post (QCTP) system.
What are the key dimensions of the AXA QCTP stud?
The shaft length is 90mm with a minimum thread length of 34mm. The hex head height is 12.8mm, the hex head width is 18mm, and the flange diameter is 30.5mm. The threading is 14mm x 2mm.
Will this stud fit my HiTorque 9x20 lathe?
Yes, this stud is specifically designed for the HiTorque 9x20 lathe's AXA quick change tool post. It threads into the 14mm x 2mm threading of the compound rest. Ensure your lathe uses the AXA size tool post before purchasing.
How do I install the AXA QCTP stud?
Installation involves running the bolt through the center of the AXA tool post and threading it into the compound rest. The stud's 14mm x 2mm thread matches the compound rest's threading. Tighten securely but avoid over-torquing. The supplied information does not include specific torque values; refer to the tool post or lathe manual if needed.
Is the AXA QCTP stud compatible with other lathe models?
The stud is designed for the HiTorque 9x20 lathe with an AXA tool post. Compatibility with other lathes depends on whether they use a 14mm x 2mm compound rest thread and accept the 90mm shaft length. The supplied information does not confirm compatibility with other models.
What material is the AXA QCTP stud made from?
It is made from black-phosphate class 10.9 steel, which offers good strength and corrosion resistance for a bench top lathe environment.
AXA QCTP Stud Specifications
Stud, AXA QCTP, for HiTorque 9x20 Lathes (Component): Black-phosphate class 10.9 steel bolt with a 90mm shaft length and 34mm minimum thread length. These dimensions ensure the stud reaches and engages the compound rest threading properly, providing a secure mount for the tool post.
Stud, AXA QCTP, for HiTorque 9x20 Lathes (Component)
Stud, AXA QCTP, for HiTorque 9x20 Lathes (Component): Hex head height 12.8mm, hex head width 18mm, flange diameter 30.5mm. The hex head and flange dimensions determine the wrench size needed and how the stud seats against the tool post, affecting stability.
Stud, AXA QCTP, for HiTorque 9x20 Lathes (Component): Threads into 14mm x 2mm threading of the compound rest. This specific thread pitch (14mm x 2mm) must match your lathe's compound rest for a proper fit. Always verify your lathe's thread specification.
Shop Related Products
Stud, AXA QCTP, for HiTorque 9x20 Lathes (Component)