What This Internal Threading Tool Does
The Arthur R. Warner Kit #20 is a boring bar designed for single-point cutting of internal threads. It uses indexable HSS triangle inserts, which means you can rotate or replace the cutting edge without sharpening. This tool is intended for bench top lathe work where you need to cut threads inside a pre-drilled or bored hole.
Arthur R. Warner Kit #20 – Supplied Specifications
- Threading Tool, Internal, 1/2" Indexable HSS Triangle Inserts, A R Warner Kit #20: Approximately 0.55" minimum hole size. This tells you the smallest internal diameter the tool can enter. If your workpiece has a hole smaller than about 0.55", this tool will not fit.

Threading Tool, Internal, 1/2" Indexable HSS Triangle Inserts, A R Warner Kit #20 - Threading Tool, Internal, 1/2" Indexable HSS Triangle Inserts, A R Warner Kit #20: Maximum thread depth is 0.100". You cannot cut threads deeper than 0.100" in a single pass or setup. For deeper threads, you may need multiple passes or a different tool.
- Threading Tool, Internal, 1/2" Indexable HSS Triangle Inserts, A R Warner Kit #20: Uses TPMW-221 and TPMW-222 inserts. Replacement inserts are not universal. You must order these specific insert numbers to keep the tool working.
What the Catalog Confirms About Build Quality
The tool holder is made in the USA by Arthur R. Warner Co., a family-owned manufacturer known for high speed steel products. The kit uses production-quality holders, and the company specializes in precision cutting, shaping, and heat treating of premium HSS. This background suggests consistent quality, though the supplied information does not include hardness ratings or test data.
Limitations You Should Know Before Buying
The supplied record does not include operating speeds, feed rates, or material-specific recommendations. Without those details, you should follow general single-point threading practices and start conservatively. The tool has a 0.5" shank and is 6" long, so it fits common tool posts but may not suit very small or very large lathes. Also, the maximum thread depth of 0.100" is a hard limit – deeper threads require alternative methods like a larger boring bar or a different threading system.


