Start with the key, not the machine
A machine key is a small but critical part that locks a gear, pulley, or handwheel to a shaft. When a keyed connection slips or feels loose, the key is often the first thing to inspect. The Key, 3x10 mm from LittleMachineShop.com is a standard replacement key for bench top machinist use, and its name tells you the size: 3 x 10 mm.
Before you order, confirm that 3 x 10 mm matches your machine or assembly requirements. The supplied product information specifically asks you to check size and fit against your machine before ordering. That check is the most important step in any mini lathe key replacement.
What the catalog confirms
- Key, 3x10 mm: Key, 3x10 mm is listed for bench top machinist use and is identified by name as a 3 x 10 mm key. The size is the primary specification you need to compare with your shaft and mating part.

Key, 3x10 mm - Key, 3x10 mm: The brand field lists Sieg Industrial Group, and this listing is for the Standard option, SKU 2131. These details help you match the listing to the part you are replacing and avoid ordering the wrong option.
How to check keyed shaft key size
You do not need to guess the key size. Measure the key slot in the shaft and the matching slot in the mating part. The key should sit in the slot without forcing, and the assembled parts should turn together without play. If you are replacing an existing key, compare its dimensions to the 3 x 10 mm listing. If the old key is worn or broken, measure the slot instead of the key, because a worn key may no longer reflect the original size.
The supplied information does not include a measuring procedure, tolerances, or a list of specific machines that use this key. Treat the size check as your own verification step, and confirm fit against your machine or assembly requirements before ordering.
How to fit a machine key without forcing it
- Clean the key slot: Remove burrs, chips, and old grease from both the shaft slot and the mating part. A clean slot lets the key seat fully and makes alignment easier to judge.
- Test the key in the shaft slot: The key should slide in without needing to be hammered. If it binds, stop and recheck the size and the slot condition.
- Align the key slot before assembly: Bring the mating part into position so its slot lines up with the key. Do not force the parts together; key slot alignment should be visible and feel free before you tighten anything.
- Check for play after assembly: With the parts assembled, rotate the shaft by hand and watch for movement between the key and the slot. Any looseness or rocking means you should stop and recheck the fit.
Where the supplied information stops
The catalog record for the Key, 3x10 mm does not include installation torque values, operating speeds, or a machine compatibility list. That is not a reason to avoid the part; it is a signal to verify the fit yourself and to follow your machine’s own documentation for assembly and operation. If you are unsure whether 3 x 10 mm is correct for your lathe, compare it to the slot dimensions and to the old key before you order.
The product name uses “key” rather than “woodruff key,” and the supplied information does not confirm a woodruff style. If your machine uses a different key profile, match the profile as well as the size.
When a small key is the right repair
A keyed connection that slips, rattles, or fails to drive a part is a sign to inspect the key before replacing larger components. Because the Key, 3x10 mm is a low-cost standard item, it is practical to keep a spare on hand for bench lathe repair key situations. Still, a new key will not fix a worn slot or a damaged shaft. If the slot itself is worn oversize, the correct repair may involve more than the key, and the supplied information does not cover that evaluation.
Use the size check, clean fit, and alignment steps above as your checkpoints. If the key seats cleanly and the assembly turns without play, you have done the fit check the listing asks for.


