Back to Blog
Comparisons 2026-11-17 Products for bench top machinists | LittleMachineShop.com 0 views

T-Slot Cleaner Sizing: 7/16" vs 5/8" T-Slot Fit

T-Slot Cleaner Sizing: 7/16" vs 5/8" T-Slot Fit

Measure your mill table's T-slot before buying a cleaner. Compare the 7/16" and 5/8" options, see how each is sized, and avoid a loose or tight fit.

Measure the narrowest part of the slot first

The size name on a T-slot cleaner refers to the T-slot it fits, not the cleaner's overall width. Before you choose between a 7/16" and 5/8" cleaner, measure the top opening of your mill table's T-slot—the narrowest part of the channel. That measurement decides which cleaner will sit in the slot and clear swarf without being too loose to be useful or too large to enter.

A 7/16" T-slot measures approximately 0.468" at the top of the slot, according to the catalog listing for the 7/16" cleaner. The 5/8" cleaner is sized for 5/8" T-slots. Those are different slot families, so the two cleaners are not interchangeable.

What each cleaner is sized for

  • T-Slot Cleaner, 7/16" T-Slot: T-Slot Cleaner, 7/16" T-Slot: made for LittleMachineShop.com specifically to fit the Mini Mills and Bench Mills; useful on any mini mill or bench mill with a 7/16" T-slot. If your mill table has a 7/16" slot, this cleaner is the direct match; the listing also confirms the approximate 0.468" top-of-slot measurement to check against.
    T-Slot Cleaner, 7/16" T-Slot
    T-Slot Cleaner, 7/16" T-Slot
  • T-Slot Cleaner, 5/8" T-Slot: T-Slot Cleaner, 5/8" T-Slot: sized for 5/8" T-slots and offered under the ABS Import Tools Inc. brand; use to clear swarf from mill T-slots. This is the option for a 5/8" slot. The catalog does not state a specific mill model or a top-of-slot measurement for this cleaner, so confirm your slot size before ordering.
    T-Slot Cleaner, 5/8" T-Slot
    T-Slot Cleaner, 5/8" T-Slot

7/16" vs 5/8": the practical differences

Both cleaners do the same job—clear swarf from mill T-slots—but they fit different slot sizes. The comparison below sticks to what the catalog confirms.

  • Slot size: 7/16" cleaner for 7/16" T-slots (approximately 0.468" at the top of the slot); 5/8" cleaner for 5/8" T-slots.
  • Brand and source: The 7/16" cleaner is made for LittleMachineShop.com; the 5/8" cleaner is offered under the ABS Import Tools Inc. brand (standard SKU 1263).
  • Stated machine fit: The 7/16" listing names Mini Mills and Bench Mills and says it is useful on any mini mill or bench mill with a 7/16" T-slot. The 5/8" listing does not name specific mill models.
  • Measuring guidance in the catalog: The 7/16" listing gives an approximate top-of-slot measurement (0.468"). The 5/8" listing gives the nominal size only.

How to confirm which cleaner fits your mill

Use your own table measurement rather than the model name alone. The steps below follow the catalog evidence and avoid assumptions about machines the listings don't name.

  1. 1. Measure the top opening of the T-slot: Use a caliper or similar measuring tool across the narrowest part of the slot at the table surface. This is the dimension the cleaner must pass through.
  2. 2. Compare to the catalog numbers: If the opening is approximately 0.468", the 7/16" cleaner is the listed match. If it measures 5/8", choose the 5/8" cleaner.
  3. 3. Check the machine description: The 7/16" cleaner is explicitly listed for Mini Mills and Bench Mills and for any mini mill or bench mill with a 7/16" T-slot. The 5/8" listing does not name machines, so your slot measurement is the deciding evidence.
  4. 4. Order the matching size: A cleaner that is too large will not enter the slot; one that is too small may not clear swarf effectively. The catalog does not provide a fit tolerance beyond the nominal sizes, so match the measured slot size.

What the catalog does not settle

Neither listing includes operating instructions, care steps, or a stated cleaning procedure. The 5/8" listing also does not give a top-of-slot measurement or name specific mill models. Those gaps are limits of the supplied information, not proof that the cleaners lack a feature. If you need a procedure for using a T-slot cleaner, follow your mill manufacturer's guidance for table and T-slot care.

The 7/16" cleaner's catalog price is USD 3.32 (comparison price USD 4.95); the 5/8" cleaner is USD 1.44 (comparison price USD 1.95). Prices are catalog values and can change, so confirm at checkout.

Related Articles

Customer Service
Home
Products
Cart
Profile