All Products

Pip-Squeak Engine Plans

Complete plans to build a simple steam engine. These steam engine project plans were created by Bill...

Graduated Dial, 50 Divisions, 20 TPI Mini Mill

This dial is used on both the X- and Y-axes of the Micro-Mark mini mill. The dial is 35 mm OD, 20 mm...

Lead tube connect CLEARANCE

Lead tube connect offered under clearance. This tube connector is intended for X3 mills. It is liste...

X3 Feed Screw, Z-Axis X3 Small Mill CLEARANCE

Z-axis feed screw for the X3 mill. This replacement part is listed under the Sieg Industrial Group b...

Arbor Press, 1-Ton

This 1-ton arbor press from ABS Import Tools Inc. is a compact bench top tool for light pressing and...

Washer / Spacer 2, Belt Tensioner, 9x20 Bench Lathe

Washer / Spacer two, used in the 9x20 bench lathe belt tensioner assembly. Outside diameter 25mm Ins...

Dial Indicator, 1" x 0.001", Dasqua

Dasqua 1" Lug Back Large Measuring Range Dial Indicator. This 1" stroke dial indicator features larg...

Collet Chuck, Taig Collet, 2MT, Sherline and Taig Tooling

2 Morse Taper abor with a 3/8"-16 drawbar thread. The chuck threading is 3/4"-16 and designed to fit...

Feed Screw, Compound Rest, Bench Lathe 20 TPI

The Feed Screw, Compound Rest, Bench Lathe 20 TPI is a replacement feed screw for the compound rest ...

Triangular Hollow Scraper

Use this triangular hollow scraper to remove burrs and spots on machined surfaces. Can also be used ...

Touch Panel Controller, Bench Mill

The board in the power box that connects to the potentiometer, speed readout, and power switch on th...

Quick Change Tool Post Set, 0XA for 9x20 Lathe

This true wedge type 0XA quick change tool post set has maximum rigidity and provides chatter free p...